Renegade Self Erecting Mobile Concrete Batch Plant

Renegade Self Erecting Mobile Concrete Batch Plant by R & S Industries, Inc

: The Renegade is a highly mobile concrete batch plant designed for companies which require fast self–erecting equipment.The Renegade has a compact travel position with fifth wheel, dual axles, air brake system and travel lights.

: The Renegade has a compact travel position with fifth wheel, dual axles, air brake system and travel lights.

: Ten heavy-duty leveling jacks which swing up for travel. Steel landing pads are removed and stored in furnished storage box.

: Rear view of plant with air compressor, landing pad storage box and hydraulic power unit. Note: Parts are protected from material spillage by metal cover.

: Enclosure for air valves with safety valves which isolate each solenoid for quick repair if needed. Solenoids are wired to central terminal to ease any service.

: Hydraulic plant leveling system with control valves for each jack and one control valve for raising and lower both silos.

: The water system includes 2” water pump with 7.5HP drive, integrated 500 gallon water surge tank with inlet / outlet butterfly valves also automatic float switch and integrated 500 gallon water weigh batcher with outlet butterfly valve and load cells.

: The Renegade fifth wheel system converts to a safety deck for servicing the truck charging conveyor head section, aeration blower and manifold and cement / water batcher discharge gates. This system is raised and lowered by a factory installed hydraulic wench.

: Fifth wheel system ready to raise into operating position. Note: Conveyor discharge head, handrails and dust ducting pre-installed.

: Three aggregate storage / weight bins. Bins include swing-up heap plates and vibrator on sand bin. A 30” horizontal belt conveyor feeds a 36” incline mixer charging belt conveyor.

: The cement batcher is equipped with a air slide discharge system which allows for a quick and even discharge. Both the cement batcher and auxiliary silo air slide are supplied air from a 5HP aeration blower.

Renegade Auxiliary Silo Trailer

: Auxiliary silo includes hydraulic self-erecting system, telescoping silo top handrails and cross-over stairway, pre-mounted air-slide, safety deck for servicing cone area of silo. Pre-installed dust collecting ducting, bin level indicators and material fill line.

: Auxiliary silo in travel position with fifth wheel, single axle, air brake system and travel lights.

Optional Auxiliary Equipment Trailer

Equipment trailer which includes the control room, central dust collector and generator pre-mounted and wired. Power, control and scale cable ready to plug into main plant and auxiliary silo also included. Note: Other arrangements including mounting the dust collector and generator on auxiliary silo trailer may also be available.

General Specifications:

Aggregate Section	CapacityCubic Yards / Tons	Weigh Capacity / Lbs	Air Vibrator	Discharge Gate with Inching valve & Pox Switch	Heap Plates
Sand Bin / Batcher	25.4 / 34.3	N/A	Yes	Yes	Yes
Aggregate Bin #1	25.4 / 34.3	N/A	Optional	Yes	Yes
Aggregate Bin #2	24.9 / 33.6	60,000	Optional	Yes	Yes

Aggregate Transfer Conveyors	CapacityTons Per Hour	FPM	Motor HP	Safety Trip Switch
30″ x 30′ Horizontal	1000	350	10	Yes
36″ x 35′ Truck Charging	1000	350	25	Yes

Cement Section	Capacity / BBL – Tons	Weigh Capacity / Lbs	Motor HP	Discharge Valve Size	Clean out Port size
Main Silo	60.7 T	N/A	N/A	(2) 10”	5”
Auxiliary Silo	60.7 T	N/A	N/A	(2) 10”	5”
Weigh Batcher	14 yds	15,000	N/A	10”	N/A

Water System	Capacity / Gallons	Weigh Capacity / Lbs	Motor HP	Discharge Valve Size
2″ Water Pump	160 GPM	N/A	5 HP	N/A
Surge Tank	500	N/A	N/A	6”
Weigh Batcher	500	4,000	N/A	6”

Air Systems	Tank Capacity / Gallons	Motor HP
Air Compressor	120	15
Aeration Blower	N/A	5

Operational Dimensions & Weights	Height	Width	Length
Aggregate Bin Charging Height	12′-11”	9′-11”	11′-6”
Main Silo Overall Height	44′-2”	12′-3”	81′-7”
Auxiliary Silo Overall Height	51′-7”	11′-11”	23′-3”

Travel Dimensions & Weights	Height	Width	Length	Weight King Pin	Rear Axle(s)
Main Plant	13′-8”	11′-11”	79′-10”	35200	31850
Auxiliary Silo	13′-6”	11′-11”	38′-5”	13200	8800
Auxiliary Equipment Trailer	13′-4”	8′-0”	38′-3”	aprox. 20000

Solid-Works CAD Slide Show

Click to view next image

Shumaker Industries

Manufacturing concrete mixer replacement drums and concrete batch plant parts such as silos, central mix drums, and central mix replacement blades since 1953.